BillMyWeek How it worksGuidesFree toolsLog inSign up

Tiler invoice template: per m², day rate, materials and CIS

Trades · Published 25 October 2026 · 7 min read

Tilers are paid three ways: by the square metre, by the day, or a fixed price for a room. Each needs the invoice laid out a little differently, and on contractor work the materials split decides how much CIS comes off. Here is how to get it right.

Make your invoice in a minute

Try it freeMake an invoice now, no sign-up. Then 14 days free, then £1.99 a month or £19.99 a year.Trade invoice templates: other trades
On this page
  1. Typical tiling rates, and what they include
  2. Three ways tilers get paid
  3. What goes on a tiler's invoice
  4. CIS for tilers
  5. Worked example: a week of price work for a contractor
  6. VAT for tilers
  7. Domestic jobs: matching the quote
  8. Common mistakes
  9. Free tiler invoice template
  10. Related trade guides

Typical tiling rates, and what they include

Checkatrade's tiling cost guide (updated June 2026) gives tiling labour at £200 to £350 a day (average £300), about £40 an hour, or around £50 per m² for floor tiling, with tiles, adhesive and grout extra. It also says a tiler can usually lay 10 to 15 m² of wall tiles or 8 to 12 m² of floor tiles in a day. Those are prices homeowners pay. Subcontract rates from a builder are often lower per m² because the contractor supplies the materials and the volume is higher, so treat them as a sense check, not a target.

The output figures are useful when you're working out a per-m² price. If your day rate is £280 and you lay 10 m² of floor tiles, the break-even price is £28 per m² before cuts, prep and travel. The day rate calculator helps you sanity-check a day rate against hours.

Three ways tilers get paid

  • Price work per m²: common on new build and refurbishment sites. Separate rates for walls and floors, with extras for small-format tiles, mosaics, large-format porcelain and diagonal or herringbone patterns.
  • Day work: for prep, stripping old tiles, tanking, levelling, or anything the site manager asks for that isn't in the measure. Get the day work sheet signed the same day.
  • Fixed price: usual for homeowners, for example "tile bathroom walls and floor as per quote Q-0412". The invoice should match the quote, plus any agreed extras.

What goes on a tiler's invoice

  • The area for each surface (walls and floors separately, in m², with the room or plot).
  • Your rate per m², and any extras such as trims, edging, cutting around a window or boxing in.
  • Day work lines with the date and the name of the person who authorised it.
  • Materials you bought: adhesive, grout, levelling compound, backer board, trims, tanking. Keep the receipts.
  • Tiles: say who supplied them. If the customer bought the tiles, write "tiles supplied by customer" so no one later thinks you've left them off.
  • Waste removal, if you charge for it.
  • For a contractor: your UTR and a CIS summary.

CIS for tilers

HMRC's CIS manual (CISR14240) lists tiling as a finishing operation inside the scheme, along with kitchen and bathroom fitting and screeding. So on site work for a builder or developer, the contractor will deduct CIS: 20% if you are registered, 30% if you are not, or nothing with gross payment status.

The deduction is worked out on the labour only. GOV.UK tells contractors to take away VAT and the cost of materials you paid for yourself before applying the rate. That is why adhesive, grout and trims you bought must be on their own lines. Tiles the contractor supplied don't go on your invoice at all.

A homeowner is not a contractor under CIS, so there is no deduction on domestic jobs, even large ones.

Worked example: a week of price work for a contractor

Kasia tiles two bathrooms on a refurbishment for a main contractor. She is CIS registered (20%) and not VAT registered. The contractor supplied the tiles; she bought the adhesive, grout and trims. The figures are illustrations, not typical prices.

LineQtyRateAmount
Wall tiling, flats 3 and 4 bathrooms36 m²£28.00£1,008.00
Floor tiling, flats 3 and 4 bathrooms12 m²£30.00£360.00
Day work: strip old tiles and board out, flat 4 (authorised by J. Price, 12 Oct)1 day£210.00£210.00
Adhesive, grout and trims (receipts attached)1£118.60£118.60
Invoice total£1,696.60
CIS stepAmount
Invoice total£1,696.60
Less materials Kasia paid for£118.60
Labour subject to CIS£1,578.00
CIS deduction at 20%£315.60
Paid to Kasia (£1,696.60 − £315.60)£1,381.00

Check: 36 × £28 = £1,008, 12 × £30 = £360, and £1,008 + £360 + £210 = £1,578 of labour. 20% of £1,578 is £315.60. Unregistered, at 30%, the deduction would be £473.40. Try it in the CIS calculator.

VAT for tilers

Below the £90,000 VAT threshold you don't charge VAT. Once you're registered, tiling for a VAT and CIS-registered contractor is normally under the domestic reverse charge: the invoice shows the VAT rate and the reverse charge wording, but the VAT isn't added to what you're owed. If Kasia were VAT registered, the contractor would account for 20% of £1,696.60, which is £339.32. Homeowners and end users pay VAT in the normal way. On zero-rated new build housing, tiling that's part of the build is normally zero rated as well. Read the reverse charge invoice guide.

Domestic jobs: matching the quote

For a homeowner, invoice exactly what you quoted, then list any extras on separate lines with the date they were agreed: "Extra: tile window reveal, agreed 3 Oct, £65.00". If the customer bought the tiles and ran short, note the delay and any return visit charge you agreed. For larger jobs, take a deposit and show it on the final invoice. See deposits and stage payments.

Common mistakes

  • One lump-sum line on a contractor invoice, so the contractor takes CIS off your adhesive and grout too.
  • Putting contractor-supplied tiles on your invoice. They aren't your materials.
  • Measuring to the nearest room rather than each surface, which invites disputes. Agree the measuring rules (openings, cuts, minimum areas) before you start.
  • Day work with no signature or date. It is much harder to get paid for later.
  • Calling a homeowner job "price work". For a householder, say what was done in plain words.

Free tiler invoice template

This free tiler invoice template is made for the trade: wall and floor tiling by the m², day work, and adhesive, grout and trims as materials. Page 1 is a blank invoice with prompt lines for tiler work, separate labour and materials sections, and the VAT and CIS sums. Page 2 is the worked example from this page filled in, showing what you're paid at 20%, 30% and 0% CIS. The Excel version adds everything up for you.

Download the tiler invoice template ⬇ Excel (.xlsx), with formulas ⬇ PDF, print and fill in Free, no sign-up, no email needed. Or make the invoice online in a minute, free with no sign-up. Guidance only, not tax advice.

CIS in one line: the contractor takes 20% (registered), 30% (not registered) or 0% (gross payment status) from the labour only, not from VAT or the materials, consumables and plant hire you paid for. In the template example that's £315.60 at 20%, £473.40 at 30% and nothing at 0%.

Prefer a plain layout? There's the general CIS invoice template (PDF or Excel) for contractor work, or the general invoice template (PDF, Word or Excel) for homeowners. You can also view a sample invoice to see the finished layout, or use the quote generator to write the quote the invoice will match. With a BillMyWeek account you can save the quote and turn it into the invoice when the job's done. If CIS is taken off your pay, the CIS refund checker gives a quick estimate (not tax advice) of whether you may be due money back.

Related trade guides

Tiling often follows the plasterer and runs alongside the plumber on bathroom jobs. Measured work is also covered in the roofer and bricklayer guides, and there are more in the trade invoicing guides. Kitchen splashbacks bring in the kitchen fitter, and floors the flooring fitter.

How BillMyWeek helps: BillMyWeek is built around day-rate and hourly work, but you can edit lines to show m² and your rate for price work. Flag adhesive and grout as materials and the CIS deduction is worked out on labour only. VAT and the reverse charge wording are optional settings. Download as PDF, Word or Excel, or email the invoice from the app. Logged in, you can also save a quote (labour and materials lines, VAT and CIS) and turn it into an invoice with one tap once the customer accepts. Start your 14-day free trial (no card needed), then £1.99 a month or £19.99 a year.

Free: The UK Contractor's Cheat Sheet 2026/27

CIS rates, overtime maths, tax dates, mileage, VAT and late payment, on 2 pages. Keep it on your phone or print it for the van.

We'll email you the cheat sheet. Unsubscribe any time. Tips only if you tick the box. Privacy

Frequently asked questions

Do tilers pay CIS?

Yes, on site work for a contractor. HMRC lists tiling as a finishing operation inside CIS. Work for a homeowner is not under CIS.

Should I charge per m² or by the day?

Use whatever you agreed. Per m² suits measurable areas; day work suits prep and stripping out. You can show both on one invoice.

Do I put the tiles on my invoice?

Only if you bought them. If the customer or contractor supplied the tiles, leave them off and note who supplied them.

How much does a tiler charge per day?

Checkatrade's June 2026 guide gives £200 to £350 a day for tiling labour, averaging £300. That's what homeowners pay. Subcontract rates vary.

Sources

This guide is general information, not legal, tax or financial advice. Rules and rates change, so check the linked GOV.UK pages for the current position.

Make this week's invoice in a minute

BillMyWeek fills in your days, day rate and overtime, takes CIS off labour if you need it, and gives you a clean PDF to send. 14 days free, then £1.99 a month or £19.99 a year. No card needed to start.

Try it free: make an invoice now, no sign-up Start your free trial

Free tools

Day rate calculatorDay rate to hourly, overtime and weekend ratesCIS deduction calculatorTake-home after 20%, 30% or 0% CISAnnual income calculatorDay rate to weekly, monthly and yearly incomeOvertime calculatorTime and a quarter, half and double timeTime and a half calculatorHourly and day rate at x1.5Overtime tax calculatorEstimate tax and NI on overtimeLate payment interest calculatorStatutory interest and fixed compensationVAT calculatorAdd or remove VAT, with the construction reverse chargeSelf-employed tax calculatorIncome Tax, Class 4 NI and take-home for 2026/27CIS refund calculatorEstimate your CIS tax refund or billMileage allowance calculatorHMRC 55p and 25p rates for 2026/27Markup and margin calculatorPrice materials and jobs, convert markup to marginHoliday pay calculator12.07% holiday pay and day rate time offFree quote generatorLabour and materials quote with VAT and CIS, saved as a PDFFree invoice chaserPayment reminder messages for text, WhatsApp and emailEtsy fee calculatorEtsy UK fees, VAT and profit per saleeBay fee calculatorPrivate and business seller fees and profitVinted tax checkerHobby or trading, HMRC reporting and taxSide hustle tax calculator£1,000 trading allowance and tax on top of a jobWorking from home expensesHMRC flat rates and 55p mileageDelivery driver tax calculatorMileage and tax for couriersAmazon seller fee calculatorReferral, plan and FBA feesRent a Room calculator£7,500 tax-free lodger incomeContractor's cheat sheet 2026/27CIS, overtime, tax dates, mileage, VAT and late payment on 2 pagesCIS cheat sheetOne-page PDF for subcontractorsIs my invoice legal? checkerCheck an invoice against GOV.UK requirementsFree invoice templatesInvoice, quote, CIS statement and day-rate templatesSample invoiceSee a finished weekly invoice PDF, no sign-up

Start a free BillMyWeek trial to turn your numbers into a ready-to-send invoice.