Gas engineer invoice template: boilers, call-outs, CIS and VAT
Gas work has more VAT and CIS traps than most trades. A boiler swap, a full heating install and a heat pump job can all be taxed differently, even for the same customer. This guide shows what to put on the invoice for each, with worked examples you can check.
Make your invoice in a minute
Try it freeMake an invoice now, no sign-up. Then 14 days free, then £1.99 a month or £19.99 a year.Trade invoice templates: other tradesOn this page
- What gas engineers charge (and where the figures come from)
- Is gas work under CIS? It depends on the job
- VAT: 20%, 5%, 0% or the reverse charge
- What to put on a gas engineer's invoice
- Worked example 1: a boiler swap for a homeowner
- Worked example 2: a full heating install for a builder
- Landlord work and gas safety records
- Common mistakes on gas engineers' invoices
- Free gas engineer invoice template
- Related trade guides
What gas engineers charge (and where the figures come from)
Checkatrade's boiler repair cost guide (updated October 2026) puts a gas engineer's hourly rate at £50 to £80, with an average of about £65, plus parts. Its boiler service guide (updated March 2026) gives £80 to £120 for a one-off gas boiler service, averaging £100. These are prices homeowners pay, so they already include your van, insurance, Gas Safe registration, tools and travel. They are not what a builder pays a subcontracted engineer by the day, and they vary a lot by region.
To set your own rate, start from what you need to earn and the days you can really bill, then add your overheads. The day rate calculator turns a day rate into an hourly rate, and the markup and margin calculator shows what you actually make on parts.
Is gas work under CIS? It depends on the job
This is where gas engineers get caught out most often. CIS only covers payments from a contractor (a builder, developer or other construction business) for construction operations. A private homeowner is never a contractor, so CIS never applies to work you do directly for a householder.
For work for a builder, HMRC's CIS manual (CISR14090) draws a clear line:
| Job for a contractor | Under CIS? |
|---|---|
| Installing a complete heating system (new build, extension, full refurbishment) | Yes |
| Replacing a whole system, for example a full strip-out and new system | Yes (HMRC treats replacement of a system as installation) |
| Swapping a boiler on its own | No. HMRC says replacing a central heating boiler is not installing a system |
| Servicing, repairing or adding a radiator to an existing system | No (repairs and extensions to systems are outside CIS) |
| A repair that also includes making good the building (for example lifting and relaying floors) | Yes. A contract with any construction work in it is caught in full |
If a builder deducts CIS from a boiler swap, ask how they are treating it and get the answer in writing. They may have a mixed contract in mind. Your CIS statement should match what was deducted. See CIS payment and deduction statements.
VAT: 20%, 5%, 0% or the reverse charge
If your taxable turnover goes over £90,000 in a rolling 12 months you must register for VAT (GOV.UK). Below that, you add no VAT and show no VAT number. Once registered, these are the cases that matter for gas and heating work:
- Gas boiler installs, repairs and services: normally standard rated at 20%. HMRC's Notice 708/6 gives a central heating system with a conventional boiler as an example of a single standard-rated supply.
- Heat pumps in homes: installing air, ground or water source heat pumps in residential accommodation is zero rated until 31 March 2027 (Great Britain, and Northern Ireland from 1 May 2023). Heating controls and insulation fitted on their own can also qualify. After that date the rate goes back to 5%.
- Grant-funded heating for a qualifying person (for example someone aged 60 or over, or on certain benefits), in their main home: the reduced rate of 5% can apply, but only to the part paid for by the grant. The householder's own contribution is standard rated.
- Work for a VAT-registered contractor inside CIS: the domestic reverse charge applies to standard and reduced-rated construction services, so you do not add VAT. Because a boiler swap on its own is outside CIS, the reverse charge does not apply to it, and you charge VAT in the normal way.
BillMyWeek can show 20%, 5% or 0% VAT, but one rate per invoice, so put a zero-rated heat pump job and a standard-rated repair on separate invoices.
What to put on a gas engineer's invoice
- Call-out or diagnostic charge, saying what it covers (for example travel and the first hour).
- Labour in hours or days, with the rate on each line.
- Parts with the make and model: boiler, flue kit, filter, valves, controls. Keep the supplier invoices.
- System cleaning, inhibitor and any chemical flush, as their own lines.
- The appliance address if it is not the billing address (common with landlords and letting agents).
- Your Gas Safe registration number and a reference to the certificate, record or notification you issued. The certificate itself is a separate document.
- For contractor work: a CIS summary showing labour, materials, the deduction and the amount payable.
Worked example 1: a boiler swap for a homeowner
Ryan is VAT registered. He replaces a combi boiler for a homeowner. No grant is involved, so it is standard rated, and there is no CIS because the customer is a householder. The figures are illustrations for the arithmetic, not typical prices.
| Line | Qty | Rate | Amount |
|---|---|---|---|
| Combi boiler (make, model and serial number) | 1 | £1,450.00 | £1,450.00 |
| Flue kit | 1 | £95.00 | £95.00 |
| Magnetic system filter | 1 | £85.00 | £85.00 |
| System cleanser and inhibitor | 1 | £42.00 | £42.00 |
| Labour: remove old boiler, fit and commission new boiler | 2 days | £320.00 | £640.00 |
| Net total | £2,312.00 | ||
| VAT at 20% | £462.40 | ||
| Total due | £2,774.40 |
Check: £1,450 + £95 + £85 + £42 + £640 = £2,312.00, and 20% of that is £462.40. If Ryan were not VAT registered, the invoice would stop at £2,312.00 with no VAT line.
Worked example 2: a full heating install for a builder
Ryan installs a complete new heating system in a house a builder is refurbishing. That is installing a system, so it is under CIS. Ryan is registered for CIS (20%) and bought the radiators, pipe and fittings himself.
| Step | Amount |
|---|---|
| Labour: 5 days × £250.00 | £1,250.00 |
| Materials bought by Ryan (receipts attached) | £640.00 |
| Invoice total (net) | £1,890.00 |
| CIS deduction at 20% of labour (£1,250.00) | −£250.00 |
| Paid to Ryan | £1,640.00 |
Because Ryan is VAT registered and the builder is VAT and CIS registered (and not an end user), the reverse charge applies. The invoice shows "Reverse charge: Customer to pay the VAT to HMRC" and the VAT the builder accounts for, 20% of £1,890.00 = £378.00, but that VAT is not added to the amount due. Use the CIS calculator to try your own figures, and see the reverse charge invoice guide for the wording.
Landlord work and gas safety records
Landlords must have gas appliances and flues they provide checked every year and keep a gas safety record (HSE). When a letting agent books the check, address the invoice to whoever agreed to pay (the agent or the landlord), show the property address on its own line, and quote the record number. Landlords and letting agents are not normally CIS contractors for routine safety checks, and a safety check is not a construction operation in any case.
Common mistakes on gas engineers' invoices
- Letting a builder take 20% CIS off a boiler swap or service without asking why.
- Applying the reverse charge to work that is outside CIS, or to a homeowner. Homeowners always pay normal VAT if you are registered.
- Charging 20% on a heat pump install in a home before 1 April 2027. It is zero rated.
- One "parts" line for a £1,500 job. List the boiler and major parts so the customer can check the model and warranty.
- No appliance address on landlord invoices, which makes them hard to match later.
Free gas engineer invoice template
There isn't a separate gas-only file. Use the free invoice template (PDF, Word or Excel, with a VAT option) for domestic work, and the CIS invoice template (PDF or Excel) for work for builders. Copy the lines from the examples above. To see a finished invoice first, look at the sample invoice, which has a CIS and reverse charge version too. For quoting, the quote generator makes a matching PDF quote. With a BillMyWeek account you can save the quote and turn it into the invoice when the job's done. If CIS is taken off your pay, the CIS refund checker gives a quick estimate (not tax advice) of whether you may be due money back.
Related trade guides
Plumbing without gas is covered in the plumber invoice guide. Heating engineers who also wire controls may find the electrician guide useful. Browse all trade invoicing guides. Air conditioning and air source heat pumps from a cooling angle are in the HVAC engineer guide.
Free: The UK Contractor's Cheat Sheet 2026/27
CIS rates, overtime maths, tax dates, mileage, VAT and late payment, on 2 pages. Keep it on your phone or print it for the van.
Frequently asked questions
Do gas engineers pay CIS?
Only on construction work for a contractor, such as installing a complete heating system. Boiler swaps, services and repairs on their own are outside CIS, and work for homeowners never is.
Is a boiler replacement zero rated for VAT?
No. A gas boiler install is normally standard rated at 20%. Heat pumps in homes are zero rated until 31 March 2027, and grant-funded heating for a qualifying person can be 5%.
Does the reverse charge apply to a boiler swap for a builder?
Not if the boiler swap is the whole contract, because it is outside CIS. The reverse charge only covers construction services within CIS.
Should my Gas Safe number be on the invoice?
It isn't a legal invoice requirement, but it helps customers and landlords match the invoice to the certificate or record. The certificate is a separate document.
Sources
- Construction Industry Scheme manual CISR14090: building service systems – HMRC
- CIS 340: guide for contractors and subcontractors – GOV.UK
- VAT on energy-saving materials and heating equipment (Notice 708/6) – GOV.UK
- VAT domestic reverse charge for building and construction services – GOV.UK
- Gas safety: landlords and letting agents – HSE
- Boiler repair costs in the UK (gas engineer hourly rate, updated October 2026) – Checkatrade
- Boiler service costs in the UK (updated March 2026) – Checkatrade
- When to register for VAT – GOV.UK
This guide is general information, not legal, tax or financial advice. Rules and rates change, so check the linked GOV.UK pages for the current position.